Task 2.2 dimensions

A place to ask questions regarding competition mission tasks, rules, and regulations
Post Reply
ahmed hikal
Posts: 1
Joined: Mon Feb 25, 2019 2:47 pm

Task 2.2 dimensions

Post by ahmed hikal » Wed Mar 04, 2020 3:00 am

I need to know where is the dimensions of the coral colony measured from ?
from the center or the edge of the T connector?

Matthew Gardner
Posts: 1114
Joined: Sat Jan 05, 2013 11:19 pm

Re: Task 2.2 dimensions

Post by Matthew Gardner » Fri Mar 06, 2020 2:33 pm

The lengths given in the prop building instructions are the length of the PVC pipe in cm. This is 1/2-inch PVC pipe, so inserts approximately 1.5 cm into the opening of the connector.

Good luck.

Matthew Gardner
MATE ROV Competition

Post Reply