Seastar injection device discrepancy/questions

Post Reply
pvhs pvit rov
Posts: 19
Joined: Sat Feb 06, 2016 2:18 pm

Seastar injection device discrepancy/questions

Post by pvhs pvit rov » Mon Jul 19, 2021 8:44 pm

The seastar injection device shown in the prop manual is a 1/2" tee. The description in the mission manual says it is a 1/2" end cap. Can you clarify which is correct. . The mission manual says we can bring our own. We have been practicing with the 1/2" tee pictured in the prop manual. Our velcro is not Jet black, it is dark gray. Is that acceptable or must the velcro be jet black on this device. If we use our own device how will we get it back after the run? appreciate your guidance on this

Post Reply