Iceberg dimension

Locked
Sadale
Posts: 2
Joined: Sat May 30, 2015 7:53 am

Iceberg dimension

Post by Sadale » Sun May 31, 2015 12:03 am

Hello. We have a question about the iceberg.
In explorer team, is the length of a,b,c,d identical as indicated in the figure below?
Image

Thank you.

Matthew Gardner
Posts: 1061
Joined: Sat Jan 05, 2013 11:19 pm

Re: Iceberg dimension

Post by Matthew Gardner » Mon Jun 08, 2015 6:08 pm

The diameter from A to C will be identical as the diameter from B to D.

The radius of each length center cross to A, B, C and D will all be identical.

Note however, that the pipe that makes up the keel of the iceberg is not exactly on center. It is offset approximately 7.2 cm from the true center of the iceberg, which is the 1/2-inch PVC cross.

Good luck.

Matthew Gardner
MATE Center

Locked