Photomosaic grid question

Posts: 4
Joined: Tue May 06, 2014 7:52 am

Photomosaic grid question

Post by blakewhittington » Tue May 06, 2014 8:31 am


I had a question about the photomosaic grid task.

When we get the 5 different images taken of the grid, do the images have to line up right then? Or can they be stretched, skewed, etc. to make the joints line up?

Here is a test of what we have done in practice and was wondering if manipulation of the images is a fault or not. ... mosaic.jpg

Seawolf Underwater Robotics Engineering
Copiah-Lincoln Community College
Wesson, MS 39083 USA

Visit our website
Like us on Facebook
Follow us on Twitter
Follow us on Instagram

Matthew Gardner
Posts: 1114
Joined: Sat Jan 05, 2013 11:19 pm

Re: Photomosaic grid question

Post by Matthew Gardner » Fri May 09, 2014 5:56 pm

You can do minimal stretching, skewing and manipulation to line the joints up. If it is too far from true, the mission station judge evaluating the photomosaic may not give credit.

To me, who will not be a mission station judge, the photomosaic attached looks good.

Good luck.

Matthew Gardner
MATE Center