Micro-ROV

Post Reply
elzat97
Posts: 2
Joined: Thu Jan 10, 2019 1:01 am

Micro-ROV

Post by elzat97 » Thu Jan 10, 2019 10:49 pm

Hi!
This is probably a stupid question but just wanted to make sure. Micro-ROV is defined as Non-ROV device. Finding a properly waterproofed motor is a bit difficult, because of the dimensions that are specified for micro-ROV. The questions is, the motors on the micro-ROV, do they have to be 100 % waterproofed?

Matthew Gardner
Posts: 848
Joined: Sat Jan 05, 2013 11:19 pm

Re: Micro-ROV

Post by Matthew Gardner » Mon Jan 14, 2019 3:37 pm

Yes. All motors must be waterproofed. The motor on the micro-ROV does not need to be shrouded, but must be waterproofed.

Good luck.

Matthew Gardner
MATE Center

Post Reply