Complete change of gripper

Locked
Javier123
Posts: 3
Joined: Sat Mar 17, 2018 12:23 pm

Complete change of gripper

Post by Javier123 » Tue Jun 12, 2018 9:29 am

Hi,

When we were making the video we did not have all the components to have a functional pneumatic gripper, now all components have arrived and the pneumatic gripper is ready.

Is there a problem if we changed the gripper working with a servo to a pneumatic gripper?
We will include this change in the technical document.


Thank you

Matthew Gardner
Posts: 812
Joined: Sat Jan 05, 2013 11:19 pm

Re: Complete change of gripper

Post by Matthew Gardner » Tue Jun 12, 2018 10:44 am

Yes, you may change your gripper.

If you are using anything other than a manual pump, your company will need to have passed the fluid power quiz.

You do not need to update your technical report - the one you turned in on May 24th is the one that will be evaluated. You should talk about the gripper in your engineering presentation.

Good luck.

Matthew Gardner
MATE Center

Locked